Additional Settings |
Top Previous Next |
|
These are additional settings available from the menu:
•Name and Ref output There are four different ways to include Name and Ref in output.
•Minimum Object Length Default value is 0.1 meter. Ways shorter than this are omitted from the output. Change to 0 to get everything in the output.
•Simplification of geometry This can be used to skip unimportant nodes in the output, leading to more compact files, with almost the same level of details. Topology remains unchanged. A value from 0 to 10 can be chosen. Recommended values are 4-10. NOTE: Skip this for now - not working as good as we thought.
•Name field width Default value is 70, but you can come across even longer names. The converter reports the longest names, after the processing.
•Ref field width Default value is 25, but you can come across even longer refs. The converter reports the longest ref, after the processing.
•Speed unit OSM specification requires that speed information is km/h unless stated otherwise. But many speeds in US / UK are mph without stating the unit. We recommend the "leave as is" setting. Otherwise numbers are translated into the chosen unit.
•Roundabout checking This is used for reporting roundabouts that are in the wrong direction. In countries with left-hand driving, roundabouts should always be clockwise and vice-versa for right-hand driving. It doesn't affect the actual output. Reporting goes to error.txt
|